PRODUCT NAME	Alpha 1330U	Alpha 1330U HS	Alpha 1400U
CAPACITY
Swing over bed	360mm	360mm	400mm
Swing over cross slide	206mm	206mm	245mm
Swing in gap	585mm	585mm	585mm
Gap width from faceplate	160mm	160mm	165mm
Distance between centres	760mm	760mm	1250mm
SPINDLE
Spindle centre height	1032mm	1032mm	1086mm
Spindle nose	D1 - 4 Camlock	A2-5	D1 - 6 Camlock
Taper in spindle nose bush	No 3 MT		No 4 MT
Spindle bore	42mm	54mm	55mm
Maximum spindle speed	3500 rpm	5000 rpm	2500 rpm
Spindle speed ranges
Low	6.35 - 3500 rpm	270 - 5000 rpm	6.25 - 625 rpm
High			25 - 2500 rpm
Maximum spindle motor power	7.5kW	7.5kW	7.5kW
TAILSTOCK
Tailstock quill diameter	75mm	75mm	73mm
Tailstock quill taper	No 4 MT	No 4 MT	No 5 MT
Tailstock quill travel	120mm	120mm	140mm
BED
Cross (X) axis ball screw diameter	20mm	20mm	20mm
Longitudinal (Z) axis ball screw diameter	32mm	32mm	32mm
Cross slide thrust - X axis	5.03kN	5.03kN	5.03kN
Saddle thrust - Z axis	5kN	5kN	6kN
Longitudinal / Cross feedrates - Metric	0.3 - 0.6mm/rev	0.3 - 0.6mm/rev	0.3 - 0.6mm/rev
Rapid traverse rate - X axis	3m/min	3m/min	3m/min
Rapid traverse rate - Z axis	6m/min	6m/min	6m/min
Rapid traverse rate - X axis (Guards open)	2m/min	2m/min	2m/min
Rapid traverse rate - Z axis (Guards open)	2m/min	2m/min	2m/min
Bed inclination	30°	30°	30°
SPACE AND WEIGHT
Maximum power consumption	23.5kVA	23.5kVA	23.5kVA
Overall machine length	2.35m	2.35m	3.2m
Overall machine width	1.68m	1.68m	1.72m
Overall machine height	1.45m	1.45m	1.5m
Overall machine weight	2700kg	2700kg	3100kg
NB: Illustrations and specifications are not binding in detail and are subject to modification and improvement without notice.

The Alpha 1330U will increase your productivity by enabling you to produce more accurate components faster than ever before.

The Alpha 1330U HS will increase your productivity by enabling you to produce more accurate components faster than ever before.

The leading edge design of the Alpha 1400U gives you better cutting performance and greater accuracy than any other lathe in its class.